Operating Instructions
25
Starting the Wash Programme
0
1.
Check that the water is on.
2.
Start the wash programme: press the START/PAUSE but-
ton. The wash programme has started or will start at the
end of the time delay set.
3
If DOOR/LIGHT flashes in red when the START/PAUSE button is pressed,
the door is not closed correctly.
Press the door firmly and press the START/PAUSE button again.
If the delay timer has been set:
The set time delay begins to expire and the remaining time until the
programme begins (in complete hours) is shown in the multi-display.
During this time you can add washing and change or stop the delay
timer.
•
To add washing: press the START/PAUSE button; the door can be
opened. Next, close the door and press the START/PAUSE button
again.
•
To change or stop the delay timer: press the DELAY TIMER button re-
peatedly until the required time is displayed; when the programme
duration is displayed (display in minutes, e.g.
120
) the wash pro-
gramme will start without delay.
3
While the delay timer is counting down the washing machine will auto-
matically switch to standby mode. Only WASH TIME is illuminated; the
multi-display shows the remaining time until the programme starts. All
other displays on the control panel are switched off in order to save en-
ergy. Pressing any button cancels the standby mode.