manualshive.com logo in svg

AEG OKO-LAVAMAT 86720 update, User Instructions, Page: 37 / 56

Share
Download
AEG OKO-LAVAMAT 86720 update User Instructions Download Page 37

Operating instructions

37

4.

If you want to check and see if wash-water cooling has been selected:
– Turn the program selector to 

F

 (SHORT SPIN).

– Press the 

k

 (PRE WASH) button briefly.

If 

l

 flashes on the program progress display, the water cooling func-

tion is enabled.

Delete wash-water cooling:

0 

1.

Turn the program selector to 

F

 (SHORT SPIN).

2.

Press the 

k

 (PRE WASH) button for at least 5 seconds.

As soon as the button is pressed 

l

 flashes on the program progress 

display. After 5 seconds 

l

 ceases to flash and illuminates continu-

ously for 5 seconds.

3.

Whilst 

l

 is continuously illuminated, release the 

k

 (PRE WASH) but-

ton.
Once 

l

 has ceased to illuminate, the water cooling function is disa-

bled.

Additional rinse and water cooling

The additional rinse and water cooling functions can be combined. 
Enable as under “Additional Rinse” and “Water Cooling”.

Summary of Contents for OKO-LAVAMAT 86720 update

























































Reviews:

No comments