Operating instructions
36
3.
Á
is flashing, release the
q
(SOAKING) button.
The additional rinse function is enabled once the flashing has ceased.
It continues to be enabled until specifically disabled.
When the additional rinse function is enabled, the +
Á
indicator on
the program progress display illuminates prior to program start and
during the additional rinse.
4.
If you wish to check whether the additional rinse function is enabled:
– Turn the program selector to
F
(SHORT SPIN).
– Press the
q
(SOAKING) button briefly.
If +
Á
flashes on the program progress display, the additional rinse
function is enabled.
Disabling the additional rinse function:
0
1.
Turn the program selector to
F
(SHORT SPIN).
2.
Press the
q
(SOAKING) button for at least 5 seconds.
As soon as the button is p
Á
flashes on the program progress
display. After 5 s
Á
ceases to flash and illuminates continu-
ously for a further 5 seconds.
3.
Á
is continuously illuminated, release the
q
(SOAKING)
button.
Once +
Á
has ceased to illuminate, the additional rinse function is
disabled.
Wash-water cooling
3
The water is cooled prior to pumping out at the end of the main wash-
ing cycle (by adding cold water). This setting is only effective for
t
(COTTON/LINEN) at a temperature of over 40 °C.)
Wash-water cooling is not selected upon delivery from the factory.
Select wash-water cooling:
0
1.
Turn the program selector to
F
(SHORT SPIN).
2.
Press the
k
(PRE WASH) button for at least 5 seconds.
After the button has been kept pressed for 5 seconds,
l
(Main Wash)
flashes on the program progress indicator for 5 seconds.
3.
Whilst
l
is flashing, release the
k
(PRE WASH) button.
After blinking has stopped, wash-water cooling is selected. It remains
functional until it is deleted.