manualshive.com logo in svg

AEG OKO Lavamat 80000 series, Technical Manual, Page: 63 / 83

Share
Download
AEG OKO Lavamat 80000 series Technical Manual Download Page 63

Frontloading Washingmachines Range 1997

6 2

GGI

h/h1/Wav/AEG_p46/technik/folien/epw/folepw/11.02.1997

05.97
HV831-N

Fault indication in multidisplay and / or in programe progress display

Display

Type of fault

Programe knob position

Remedy

CE

No code from the waterdistributer within 2 min.

Spin                                                     replace waterdistributer
Pump                                                    check cable to the waterdistributer
Starching                                              check cable for waterdistributer code
Delicate rinse
Wool cold
Wool 30

°

C

Fault indication is only cleared by customer service programe and rectification ; Programe stops ;

 1

 Programe continues.

 

Fault indicated at the end of programe. 

2

 Fault indication can be cleared by customer. Start button is flashing.

Fault is stored (protected against main short circuit)

3

 Programe continues.Fault indicated only in the customer service programe.

13.  Service test programe

Summary of Contents for OKO Lavamat 80000 series




















































































Reviews:

No comments