Operating Instructions
17
Run a washing cycle
Brief instructions
A washing cycle is run in the following steps:
0
1.
Set the correct washing program:
–
Set the program and temperature with the program selector.
–
Set any additional program(s).
2.
If necessary, change the spin speed/select
o
(RINSE HOLD).
3.
Set the
b
(DELAY TIMER) if necessary.
4.
Open the filling door and fill with washing.
5.
Close the filling door.
6.
Add the detergent/care agent.
7.
Start the washing program with the
O
/
s
(START/PAUSE) button.
After the washing program ends:
Important!
If the washing cycle ended with a rinse hold, perform
C (PUMP OUT), D (SPIN) or F (SHORT SPIN) before opening the filling
door.
8.
Open the filling door and remove the washing.
9.
Switch off the washing machine: Set the program selector to
I
(OFF).