1.
Touch the Start/Pause
button to
pause the appliance. The related
indicator flashes.
2.
Touch the Delay Start button
repeatedly until the display shows
the desired delay time.
3.
Touch the Start/Pause
button
again to start the new countdown.
11.8
The SensiCare System
load detection
After touching the Start/Pause
button:
1.
The SensiCare System starts
estimating the weight of the load to
calculate the real programme
duration. During this phase the two
dots separating hours from minutes
are blinking
2.
After about 15-20 minutes new cycle
duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
11.9
Interrupting a
programme and changing the
options
When the programme is running, you
can change
only some
options:
1.
Touch the Start/Pause
button.
The related indicator flashes.
2.
Change the options. The given
information in the display changes
accordingly.
3.
Touch the Start/Pause
button
again.
The washing programme continues.
To start the programme
again make sure that the
programme dial is correctly
positioned on the
interrupted programme and
the indicator of the Start/
Pause
button is flashing.
11.10
Cancelling a running
programme
1.
Press the button On/Off to cancel
the programme and to deactivate
the appliance.
2.
Press the button On/Off again to
activate the appliance.
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System
. The
water and the detergent are
not drained out in order to
avoid waste.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the
"Reset" position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
11.11
Opening the door -
Adding garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.
While a programme or the delay start
operates, the appliance door is locked.
The display shows the indicator
.
1.
Touch the button Start/Pause
.
In the display the related door lock
indicator goes off.
2.
Open the appliance door. If
necessary, add or remove the items.
Close the door and touch the Start/
Pause
button.
The programme or the delay start
continues.
ENGLISH
21