Installation and connection instructions
42
Electrical Connection
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
1
WARNING - THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should these safety
measures not be observed.
Before switching on, make sure
the electricity supply voltage is
the same as that indicated on the
appliance rating plate.
The rating plate is located at the
top of the rim of the open door.
The appliance is supplied with a
13amp plug fitted. In the event of
having to change the fuse in the
plug supplied, a 13amp ASTA ap-
proved (BS 1362) fuse must be used.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires in the mains lead are
coloured in accordance with the
following code:
•
The wire coloured green and yellow must be connected to the termi-
nal marked with the letter “E“ or by the earth symbol
or coloured
green and yellow.
•
The wire coloured blue must be connected to the terminal “N“ or
coloured black.
•
The wire coloured brown must be connected to the terminal marked
“L“ or coloured red.
•
Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
1
WARNING! A cut off plug inserted into a 13 amp socket is a
serious safety (shock) hazard. Ensure that the cut off plug is
disposed of safely.
Green and Yellow: Earth
Blue:
Neutral
Brown:
Live
Green & Yellow
Brown
Cord Clamp
Blue
