manualshive.com logo in svg

AEG LAVAMAT 72630, User Information, Page: 20 / 52

Share
Download
AEG LAVAMAT 72630 User Information Download Page 20

Operating Instructions

20

Opening and closing the door

0 

Open: Pull the handle on the door.

0 

Close: Press the door firmly closed.

The displays DOOR and START/PAUSE show 
when the appliance is switched on whether 
the door can be opened:

3 

If
– the display DOOR flashes red,
– then the error code 

E40

 flashes in the multi display,

– and the MAIN WASH display flashes,
an attempt was made to start a washing program without the door 
being correctly closed. In this case, press the door firmly closed and 
start the washing program again.

Loading the washing

3 

See "Program Tables" for maximum loads.
For information about the correct preparation of the washing see "Sort 
and prepare washing".

0 

1.

Sort and prepare the washing according to type.

2.

Open the door: Pull the handle on the door.

3.

Load the washing.

Important!

 Do not trap washing when closing the door. The fabrics and 

the machine could be damaged.

4.

Close the door firmly.

DOOR Indicator

Display START/PAUSE

Door opening possible?

lights up green

flashes red

yes

lights up green

lights up red

yes, after the START/PAUSE 

key is pressed

is off

flashes red 

or lights up red

no

1)

1) The door is locked because of a high water level or high temperature

Summary of Contents for LAVAMAT 72630





















































Reviews:

No comments