Problem
Possible cause/Solution
The machine vibrates or is noisy:
The transit bolts and packing have not been re
-
moved.
• Check the correct installation of the appli
-
ance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the
drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or the machine does not
spin:
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib
-
uted in the drum. The laundry is redistributed
by reverse rotation of the drum. This may hap
-
pen several times before the unbalance disap
-
pears and normal spinning can resume. If, after
some minutes, the laundry is still not evenly
distributed in the drum, the machine will not
spin.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load man
-
ually and then select the spinning pro
-
gramme.
The machine makes an unusual noise:
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
No water is visible in the drum:
Machines based on modern technology operate
very economically using very little water with
-
out affecting performance.
The display shows the alarm code
:
Anti-flooding system has activated.
• Disconnect the appliance and contact the
Service Force Centre
The drum light doesn’t work:
Please contact your local Service Centre.
What to do if…
29