27
If the appliance is to stand on a
plinth:
In order for the appliance to be se-
cure on the plinth, fixing plates*)
must be mounted, into which the
appliance is inserted.
If the appliance is to stand on floors that vibrate, e. g. floors of
wooden joists with deal boards:
If possible, install the appliance in one corner of the room.
1.
Screw a water-resistant wooden board (at least 15 mm thick) onto at
least 2 of the floor joists.
2.
Affix fixing plates *) onto the wooden board, into which the appliance
is inserted.
*) The fixing plates can be obtained from the Customer Care Depart-
ment.
Making the appliance level
The four feet of the appliance are
pre-adjusted.
Large degrees of unevenness can be
compensated for by adjusting the
four feet of the appliance.
Use the special spanner supplied to
do this.
Important!
Do not use pieces of
wood, cardboard or such like to lev-
el out small degrees of unevenness
in the floor. Adjust the adjustable
feet instead.
Electrical connection
Details about the voltage, type of supply and the fuses required are to
be found on the rating plate. The rating plate is next to the doorway.
Summary of Contents for Lavamat 66600
Page 1: ...LAVAMAT 66600 Washing machine User information ...
Page 34: ...34 ...
