AEG LAVAMAT 3085, Instruction Booklet, Page: 26 / 43

63
Cleaning and maintenance
Emergency emptying out
If the water is not discharged, proceed as follows to empty out the
machine:
• pull out the plug from the power socket;
• close the water tap(s);
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the emergency
emptying hose into the bowl. Remove its cap. The water should drain
by gravity into the bowl. When the bowl is full, put the cap back on
the hose. Empty the bowl. Repeat the procedure until water stops
flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after having
plugged it;
• screw the pump cover again and close the door.
35.292.805…Lavamat 3085 UK doc. 10/03/2003 12:22 Página 63