manualshive.com logo in svg

AEG LAVALOGIC 1600, User Information, Page: 55 / 72

Share
Download
AEG LAVALOGIC 1600 User Information Download Page 55

55

Installation of the appliance

Transporting the appliance

•

Do not place the washing machine on its front or on its right hand 
side (viewed from the front). This is to prevent the possibility of the 
electronic components becoming wet.

•

Never transport the unit without the transport packaging and bolts/
bars. Do not remove the transport packaging until the appliance is at 
the installation location. Transporting the unit without the transport 
packaging can damage it.

•

Never lift the appliance by the door.

When transporting the unit with a sack trolley:

•

Attach the sack trolley only at the side. The shovel of the sack trolley 
must not be longer than 24 cm, otherwise the float switch can be de-
stroyed.

Remove transport packaging

Important! 

It is essential to re-

move the transport packaging be-
fore putting the appliance into 
operation. Keep all parts of the 
transport packaging in a safe 
place for future use.

 

1.

Open both hose holders on the 
appliance's rear side and remove 
the hoses and mains cable.

Summary of Contents for LAVALOGIC 1600









































































Reviews:

No comments