background image

Power consumption in networked stand‐

by (W)

Time to networked standby (min.)

2.00

15

The information given in the chart above is compliant with the EU Commission regulation

1015/2010 implementing directive 2009/125/EC and EU commission regulation No.

1275/2008.

15.5 Common programmes

These values are indicative only.

Programme

kg

kWh

Litres

h:mm

%

°C

rpm

1)

Cottons

2)

95°C

9

2.15

85

3:35

44

85

1600

Cottons

60°C

9

1.55

80

3:50

44

55

1600

Cottons

3)

20°C

9

0.35

80

3:10

44

20

1600

Synthetics

40°C

4

0.80

50

2:25

35

40

1200

Delicates

4)

30°C

2

0.30

45

1:10

35

30

1200

Wool

30°C

2

0.25

65

1:05

30

30

1200

1) Reference indicator of the spin speed.
2) Suitable for washing heavily soiled textiles.
3) Suitable for washing lightly soiled cottons.
4) It also performs as quick washing cycle for lightly soiled laundry.

16. ACCESSORIES

16.1 Available in

www.aeg.com/shop or from

authorised dealer

Read carefully the instructions supplied

with the accessory.

Only appropriate

accessories approved by

AEG ensure the safety

standards of the appliance. If

unapproved parts are used,

any claims will be

invalidated.

www.aeg.com

56

Summary of Contents for L8FEC966CA





























































Reviews: