manualshive.com logo in svg

AEG L8FEC942Q, User Manual, Page: 15 / 60

Share
Download
AEG L8FEC942Q User Manual Download Page 15

5

Opc. - Skipping

phase touch

button

By touching this button you can set:

• Aclarado/Enxag. at first touch. The washing programme starts

from the rinsing phase by skipping the washing phase.

All set options (except permanent extra rinse)

are deselected automatically.

• Centrif. at second touch. The appliance skips washing and

rinsing phase.

• Drenar. at third touch. The appliance performs the draining

phase only.

At firth touch, the appliance proposes the de‐

fault setting of the washing programme again.

6

Inicio/Pausa

touch button

Touch this button to start, pause the appliance or interrupt a run‐

ning programme.

7

Extra Rápido

touch button

With this option you can decrease the programme duration:

• If your laundry is normally or lightly soiled, it may be advisable

to shorten the washing programme. Touch this button once to

decrease the duration.

• In case of smaller load, touch this button twice to set an extra

quick programme.

The display shows the indicator 

.

This option can also be used to shorten the Vapor

programme duration.

ENGLISH

15

Summary of Contents for L8FEC942Q





























































Reviews:

No comments