background image

Programme Universal

powder

1)

Liquid Uni‐

versal

Liquid for

coloureds

Delicates

woollens

Special

Wool/Silk

--

--

--

OKOPower

--

--

--

20 min. - 3 kg

--

--

--

Outdoor

--

--

--

Duvet

--

--

--

1) At temperature higher than 60 °C the use of powder detergent is recommended.

▲ = Recommended

-- = Not recommended

8.2 Woolmark Apparel Care - Green

The  wool  wash  cycle  of  this  machine  has

been  approved  by  The  Woolmark  Company

for the washing of wool garments labelled as

«hand wash» provided that the garments are

washed  according  to  the  instructions  issued

by the manufacturer of this washing machine.

Follow the garment care label for drying and

other laundry instructions. M1636

The Woolmark symbol is a Certification mark

in many countries.

9. BEFORE FIRST USE

During installation or before

first use you may observe

some water in the appliance.

This is a residual water left

in the appliance after a full

functional test in the factory

to ensure the appliance is

delivered to customers in

perfect working order and is

no cause for concern.

1. Make sure that all transit bolts have

been removed from the appliance.

2. Make sure that the electrical power is

available and the water tap is open.

3. Pour 2 litres of water into the

detergent compartment marked by

.

This action activates the drain system.

4. Pour a small quantity of detergent

into the compartment marked by 

.

5. Set and start a programme for cotton

at the highest temperature without

any laundry in the drum.

This removes all possible dirt from the

drum and the tub.

10. SETTINGS

10.1 Child Lock

With this option you can prevent that the

children play with the control panel.

• To activate/deactivate this option,

touch the Stains/Prewash and the

Extra Rinse buttons simultaneously

www.aeg.com

22

Summary of Contents for L8FEC866R

















































Reviews: