• Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
• Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3.
INSTALLATION
WARNING!
Refer to Safety chapters.
3.1
Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
WARNING!
As you will put down the
appliance on the rear side,
wait about 6 hours before
you use it
. This time is
necessary to enable the
compressor to work
properly.
1.
Remove the external film. If
necessary, use a cutter.
2.
Remove the cardboard top and the
polystyrene packaging materials.
3.
Remove the internal film.
4.
Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5.
Carefully put down the appliance
with the rear side on it.
6.
Put the front polystyrene packaging
element on the floor under the
appliance.
www.aeg.com
6
