background image

 AutoDose detergent tank.

 AutoDose fabric softener tank.

The appliance is pre-set by the factory

to suit most users habits.
Once started the programme, the

appliance will automatically release the

right amount of detergent and softener

according to the real fabric load, if the
indicators 

 and/or   are on in the

display.

In some programmes,

AutoDose is OFF (OFF is on
and the indicators 

 and/or

 are off in the display)

because there are garments

requiring special detergents

or treatments. When OFF is

on, pour the detergent and

other treatments in the

proper manual filling

compartment.

Please refer to "AutoDose

and options compatibility

with programmes" in

"Programmes" chapter.

Further explanations on

AutoDose and activation of

advanced settings are

available downloading the

APP.

9.2 Detergent dispenser with

AutoDose tanks and manual

compartments

When using detergent and

any other treatments, always

follow the instructions that

you find on the packaging of

the detergent products.

Anyway, we recommend not

to exceed the maximum

indicated level in each

compartment (

).

If both AutoDose tanks are enabled in

the set programme, liquid detergent and

fabric softener are automatically loaded.
If one of the AutoDose tank or both

are disabled (OFF ) in the set

programme, proceed by manually filling

the product in the proper compartment.

Manual

AutoDose

(Manual)

WARNING!

Do not put powder

detergent in the AutoDose

compartment.

 AutoDose tanks for liquid

detergent 

 and fabric softener

.

 Manual compartment for washing

phase: powder or liquid detergent.

www.aeg.com

24

Summary of Contents for L7FEE945CA

































































Reviews: