manualshive.com logo in svg

AEG L7FEE941Q, User Manual, Page: 51 / 56

Share
Download
AEG L7FEE941Q User Manual Download Page 51

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture

IPX4

Water supply pressure

Minimum
Maximum

0.5 bar (0.05 MPa)
8 bar (0.8 MPa)

Water supply 

1)

Cold water

Maximum Load

Cotton

9 kg

Energy Efficiency Class

A+++

Spin Speed

Maximum spin speed

1351 rpm

1) 

Connect the water inlet hose to a water tap with a 3/4'' thread.

16. 

ACCESSORIES

16.1 Available in

www.aeg.com/shop or from

authorised dealer

Only appropriate

accessories approved by

AEG ensure the safety

standards of the appliance. If

unapproved parts are used,

any claims will be

invalidated.

16.2 

Fixing plate kit

If you install the appliance on a plinth,

secure the appliance with the fixing

plates.
Read carefully the instructions supplied

with the accessory.

16.3 

Stacking kit

The tumble dryer can be stacked on the

top of the washing machine 

only by

using the correct stacking kit

manufactured and approved by AEG

.

Verify the compatible

stacking kit by checking the

depth of your appliances.

The stacking kit can be used only with

the appliances specified in the leaflet

provided with the accessory.
Read carefully the instructions supplied

with the appliance and with the

accessory.

ENGLISH

51

Summary of Contents for L7FEE941Q

























































Reviews:

No comments