background image

A small laundry load helps to

reach better results.

6.8 

Energy saving 

Set this option for slightly or normally

soiled items washed at 30°C or higher

temperatures.
The appliance decreases the washing

temperature and extends the washing

time to obtain a good washing efficiency

by saving energy. The display shows the
indicator 

.

If you select the Cotton

programme at 40°C or 60°C,

the display shows the
indicator 

; these are

the standard cotton

programmes, the most

efficient programmes in

terms of combined energy

and water consumption.

6.9 

Time Save 

With this option you can decrease the

programme duration.
• If your laundry is normally soiled, it

may be advisable to shorten the

washing programme. Touch this

button 

once

 to decrease the duration.

• In case of smaller load, touch this

button 

twice

 to set an extra quick

programme.

The display shows the indicator 

.

This option can also be used

to shorten the Steam

programme duration.

6.10 

Skipping phase button

(Option) 

By touching this button you can set:

• Only Rinse at first touch. The washing

programme starts from the rinsing

phase by skipping the wash phase.

All set options (except

permanent extra rinse)

are deselected

automatically.

• Only Spin at second touch. The

appliance skips wash and rinse phase.

• Only drain at third touch. The

appliance performs only the drain

phase.

At firth touch the appliance

proposes the default setting

of the washing programme

again.

6.11 

Delay Start 

With this option you can delay the start

of a programme in a more convenient

time.
Touch repeatedly the button to set the

required delay. The time increases by

steps of 30 minutes up to 90' and from 2

hours up to 20 h.
After touching theStart/Pause button,
the display shows the indicator 

 and

the selected delay time and the

appliance begins the countdown.

6.12 

Start/Pause 

Touch the Start/Pause button to start,

pause the appliance or interrupt a

running programme.

ENGLISH

15

Summary of Contents for L7FEC41S









































Reviews: