manualshive.com logo in svg

AEG L7FC8432BI, User Manual, Page: 29 / 48

Share
Download
AEG L7FC8432BI User Manual Download Page 29

• Do not exceed to liquid

detergent dose indicated on the

flap.

• Do not set the prewash phase.

• Do not set the delay start

function.

5.

Measure out the detergent and the

fabric conditioner.

6.

Carefully close the detergent

dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

10.5 

Setting a programme

1.

Turn the programme dial to select

the desired washing programme.

The indicator of the Start/Pause button

flashes.

The display shows an indicative

programme duration and the maximum

load.

2.

To change the temperature and/or

the spin speed, touch the related

buttons.

3.

If desired, set one or more options

by touching the related buttons. The

related indicators illuminate on the

display and the given information

changes accordingly.

If a selection is 

not possible

an acoustic signal sounds

and the display shows

.

10.6 

Starting a programme

Touch the Start/Pause button to start the

programme. It is not possible to start the

programme when the indicator of the

button is off and doesn't flash (e.g.

programme dial on a wrong position).

The related indicator stops flashing and

stays on.

The programme starts, the door is

locked. The display shows the indicator

.

The drain pump can operate

shortly before the appliance

fills water.

10.7 

Starting a programme

with the delay start

1. Touch the Delay Start button

repeatedly until the display shows the

desired delay time. On the display the
indicator shows 

.

2. Touch the Start/Pause 

 button. The

appliance door locks and starts the

countdown of the delay start. The display
shows the indicator 

.

When the countdown is completed, the

programme starts automatically.

Cancelling the delay start after

the countdown has started

To cancel the delay start:

1.

Touch the Start/Pause 

 button to

pause the appliance. The related

indicator flashes.

2.

Touch the Delay Start button
repeatedly until the display shows 
and the indicator 

 goes off.

3.

Touch the Start/Pause 

 button

again to start the programme

immediately.

Changing the delay start after

the countdown has started

To change the delay start:

1.

Touch the Start/Pause 

 button to

pause the appliance. The related

indicator flashes.

2.

Touch the Delay Start button

repeatedly until the display shows

the desired delay time.

3.

Touch the Start/Pause 

 button

again to start the new countdown.

ENGLISH

29

Summary of Contents for L7FC8432BI

















































Reviews:

No comments