manualshive.com logo in svg

AEG L7FBE941Q, User Manual, Page: 52 / 56

Share
Download
AEG L7FBE941Q User Manual Download Page 52

WARNING!

Do not put the tumble dryer

under the washing machine.

16.4 

Pedestal with the drawer

To raise your appliance and make

loading and unloading laundry easier.
The drawer can be used for laundry

storage e.g.: towels, cleaning products

and more.
Read carefully the instructions supplied

with the accessory.

17. 

QUICK GUIDE

17.1 

Daily use

1

2

3

4

• Connect the mains plug to the mains

socket.

• Open the water tap.

• Push the 

On/Off

 button to turn the

appliance on 

(1)

.

• Turn the programme dial to set the

desired programme 

(2)

.

• Set the desired options by means of

the corresponding touch buttons

 (3)

.

• Put the laundry in the drum, one item

a time without exceeding the

maximum suggested load. Close the

door and make sure that no laundry

stays between the seal and the door.

•

When using AutoDose tanks

, the

detergent and fabric softener are

uploaded automatically. Make sure

that tanks are not empty.

When using manual compartments

,

pour the detergent and other

treatments in the proper

www.aeg.com

52

Summary of Contents for L7FBE941Q

























































Reviews:

No comments