manualshive.com logo in svg

AEG L6FQW842G, User Manual, Page: 20 / 56

Share
Download
AEG L6FQW842G User Manual Download Page 20

These indicators will appear next to detergent tank 

 and softener

tank 

 indicators when increasing or decreasing the automatic deter-

gent or softener dosage.

5.3 

Multilingual badges

Adhesive badges in different languages

are supplied with the appliance.
The desired badge can be glued next to

the programme dial.

Prog

ram

Anti

aller

gi

20 m

in. - 

3 kg

Moti

onst

øj

Koge

-/Ku

lørt

Synt

etisk

Finv

ask

Uld/

Silke

Damp

Vatt

æpp

er

 Jean

s

6. 

BEFORE FIRST USE

During installation or before

first use you may observe

some water in the appliance.

This is a residual water left in

the appliance after a full

functional test in the factory

to ensure the appliance is

delivered to customers in

perfect working order and is

no cause for concern.

1.

Make sure that all transit bolts have

been removed from the appliance.

2.

Make sure that the electrical power is

available and the water tap is open.

3.

Make sure to fill the AutoDose tanks
with liquid detergent 

 and fabric

softener  . Refer to "AutoDose

basic setting " paragraph in "The

AutoDose technology" chapter.

4.

Pour 2 litres of water inside the drum.

This action activates the drain system.

5.

Set and start a programme for cotton

at the highest temperature without

any laundry in the drum.

This removes all possible dirt from the

drum and the tub.

7. 

THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.

7.1 

Introduction

Right detergent and fabric softener

dosage takes better care of the laundry

and ensuring good wash performances.
Too much detergent damages your

clothes and too little doesn’t ensure

good wash performances.
This appliance is equipped with an auto

dosing system able to automatically

provide the right detergent and fabric

softener dosage to preserve the fabric

integrity and colour brightness.

www.aeg.com

20

Summary of Contents for L6FQW842G

























































Reviews:

No comments