manualshive.com logo in svg

AEG L6FBG941CA, User Manual, Page: 34 / 56

Share
Download
AEG L6FBG941CA User Manual Download Page 34

Every time you switch the

appliance on, the appliance

takes about 10 seconds to

connect to the network

automatically. When the

indicator   stops blinking

the connection is ready.

To switch the wireless connection off,

press and hold the AutoDose Liquid
Detergent 

 and the AutoDose Fabric

Softener   buttons for a few seconds

simultaneously until the first acoustic
signal. Release the buttons. 

appears on the display for 5 seconds.

If you switch the appliance

off and on again, the

wireless connection is

automatically off.

To remove the wireless credentials,

make sure that the Wi-Fi connection is

on. Press and hold the AutoDose Liquid
Detergent 

 and the AutoDose Fabric

Softener   buttons for at least 10

seconds simultaneously until the second
acoustic signal: 

 appears on the

display.

11.3   Remote Start

The Remote Start enables you to start a

cycle in remote control.

The Remote Control

activates automatically when

you press the Start/Pause

 button to start the

programme, but it is also

possible to start a washing

programme remotely. This

function is deactivates when

door is open.

When the App is installed and the

wireless connection is complete, you can

activate the Remote Start:

1. Touch the Remote   button and the

indicator 

 blinks on the display

for a few seconds.

2. Touch the Start/Pause 

 button to

activate the Remote Start before the
indicator 

 stops blinking.

The indicators   and 

 appear on the

programme summary screen and the

door is locked. Now it is possible to start

the programme remotely.

When touching the Start/
Pause 

 button after the

indicator 

 stops

blinking, the Remote Start is

not activated, but the set

programme starts.

To remove the Remote Start, tap on the
Remote   button and confirm by
pressing the Start/Pause 

 button.

11.4 Over-the-air update

The App may propose an update for your

appliance.
The update is accepted via App only.
If a programme is running, the App

notifies that the update will start at the

end of the programme.
During the update, the appliance shows

 in the display.

Do not switch off or unplug the appliance

during update.
The appliance will usable again at the

end of the update, without any

notification about successful update.

www.aeg.com

34

Summary of Contents for L6FBG941CA

























































Reviews:

No comments