11.
END OF THE PROGRAMME
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display comes on and a
message tells you that the programme is
completed.
The indicator of Start/Pause button goes
off.
1.
Press the button On/Off to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2.
Remove the laundry from the
appliance.
3.
Make sure that the drum is empty.
4.
Keep the door and air filter ajar, to
prevent mildew and odours.
12.
DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
12.1
Preparation to drying
1.
Press button On/Off for some
seconds to activate the appliance
2.
Load the laundry one item at a time.
3.
Turn the programme dial to the
drying programme applicable for the
items to dry.
The text bar in the display tells which
programme you have chosen.
When drying a big amount
of laundry, to have good
drying performances, make
sure that the laundry itself is
not rolled up and that is
uniformly distributed in the
drum.
At the beginning of the
drying cycle (3 – 5 min.)
there could be a slightly
higher sound level. This is
the compressor start and it is
quite normal for compressor
powered appliances such
refrigerators, freezers and so
on.
12.2
Automatic drying
1.
Touch button Auto Dry repeatedly to
set the required dryness level. The
indicators on the control panel
illuminate accordingly:
a. IRON DRY
level - 1 indicator on:
for cotton items
b. CUPBOARD DRY
level - 2
indicators on: for cotton and
synthetic items
c. EXTRA DRY
level - 3 indicators
on : indicator for cotton items
You cannot set all dryness
levels for any type of
laundry.
The display shows the time end and the
set drying programme.
2.
Touch button Start/Pause to start the
programme.
The text bar tells that the appliance is
drying.
The display shows the door locked
indicator and the programme in progress
indicator and, alternatively, the time
of the cycle end.
The display updates regularly the drying
cycle time (every minute).
12.3
Timed drying
1.
Touch button Time Dry again and
again to set the time value (see the
«Drying Programme» table).
ENGLISH
23
