background image

The value shows the total number of the rinses.

The indicator bar is fully filled when you set to the maximum
number of rinses.

L

The Stain symbol comes on when you activate the function.

The Prewash symbol comes on when you activate the func-
tion.

The indicator bar is not fully filled when you set only one of
the functions.

The indicator bar is fully filled when you set the two func-
tions.

START/PAUSE BUTTON 

4

Press button 

4

 to start or interrupt a

programme.

DELAY START BUTTON 

5

Press button 

5

 to delay the start of a

programme from 30 minutes to 20
hours.

TIME SAVE BUTTON 

6

Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened du-

ration' for items with daily soil.

– Press two times to set 'Extra Quick'

for items with light soil.

Some programmes accept only
one of the two functions.

EXTRA RINSE BUTTON 

7

Press button 

7

 to add rinsing phases

to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.

THE STAIN-PREWASH
BUTTON 

8

Press button 

8

 to add the stain and/or

a prewash phase to a programme.
Press the button again and again to ac-
tivate one or two options. The related

symbol and the indicator bar comes on
in the display.

STAIN

• Use this function for laundry with

hard stains to remove.
When you set this function, put the
stain remover into compartment 

 .

This function increases the pro-
gramme duration.

This function is not available
with a temperature lower than
40° C.

PREWASH

• Use this function to add a prewash

phase before the washing phase. We
recommend that you use this func-
tion when you have laundry with a
high level of soil.

The set of this function increa-
ses the programme duration.

SPIN BUTTON 

9

Press this button to:
• Decrease the maximum speed of the

spin phase of the programme.

The display shows only the spin
speeds available with the set
programme.

• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.

Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.

10

Summary of Contents for L 87685 FL





































Reviews: