AEG L 82470 BI, User Instructions, Page: 26 / 72

Problem Possible cause/Solution
Spinning starts late or
the machine does not
spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rota-
tion of the drum. This may happen several times be-
fore the unbalance disappears and normal spinning
can resume. If, after some minutes, the laundry is still
not evenly distributed in the drum, the machine will
not spin.
• The laundry load is perhaps to little, add more
items, redistribute the load manually and then se-
lect the spinning programme.
No water is visible in
the drum:
Appliances based on modern technology operate
very economically using very little water without af-
fecting performance.
The display shows the
alarm code
:
Anti-flooding system has activated.
• Pull out the plug from the power socket, close the
water tap and contact the Service Force Centre.
13. INSTALLATION
13.1 Unpacking
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2. Remove the cardboard top.
3.
Remove the polystyrene packaging
materials.
26 www.aeg.com