2.
Press button
4
, the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
4
to
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the
Steam
programme.
CANCEL THE DELAY START
1.
Press button
4
. The related indi-
cator flashes.
2.
Press button
5
again and again
until the display shows
0’
.
3.
Press button
4
. The programme
starts.
OPEN THE LID
While a programme or the delay start
operates, the lid is locked.
To open the lid:
1.
Press button
4
. You can open the
lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.
2.
Open the lid.
3.
Close the lid and press button
4
.
The programme or the delay start
continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the lid .
If necessary, do the following
procedure to open the lid.
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that there is no
water in the drum.
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause but-
ton
4
goes off.
• You can open the lid 2 minutes after
the appliance stops. The door lock
symbol goes off.
• Press button
1
to deactivate the ap-
pliance. After five minutes from the
end of the programme, the AUTO
OFF function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display shows
the end of the last set pro-
gramme. Turn the programme
knob to set a new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
• Keep the door ajar, to prevent mil-
dew and odours.
• Close the water tap.
The washing programme is comple-
ted, but the 'Rinse Hold' function is
on:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
2.
Press the Start/Pause button
4
.
The appliance drains the water and
spins.
3.
When the programme is completed
and the door lock symbol goes off,
you can open the door
4.
Deactivate the appliance.
ENGLISH
15