AEG L 70260 TL1, User Manual, Page: 11 / 28

At programme start the display shows the duration programme for the
maximum load capacity. During the washing phase the programme du-
ration is automatically calculated and can be greatly reduced if the laun-
dry load is lower than the maximum load capacity (e.g. Cotton 60°C,
maximum load capacity 6 kg, the programme duration exceeds 2 hours;
real load 1 kg, the programme duration don’t reach 1 hour). When the
appliance is calculating the real programme duration a dot blinks in the
display.
Programmes Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption
(litre) Approxi-
mate pro-
gramme du-
ration (mi-
nutes) Remaining
moisture
(%)
1)
Cottons 60 °C 6 1,10 56 180 53
Cottons 40 °C 6 0,65 54 150 53
Synthetics 40 °C 2.5 0,45 46 105 35
Delicates 40 °C 2.5 0,55 46 90 35
Wool/Handwash 30
°C
1 0,35 50 65 30
Standard cotton programmes
Standard 60 °C cot-
ton
6 0,79 47 248 53
Standard 60 °C cot-
ton
3 0,58 39 174 53
Standard 40 °C cot-
ton
3 0,48 38 169 53
1)
At the end of spin phase.
Off Mode (W) Left On Mode (W)
0,48 0,48
The information given in the chart above are in compliance with the EU Commission regu-
lation 1015/2010 implementing directive 2009/125/EC.
7. OPTIONS
7.1 Temperature
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
7.2 Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
ENGLISH 11