AEG IKE64471XB, User Manual

Page: 20 / 28

Problem Possible cause Remedy
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode. Use cookware with a diame-
ter applicable to the activa-
ted function or function
mode. Use cookware with a
diameter smaller than 160
mm on a single section of
the flexible induction cook-
ing area. Refer to "Flexible
induction cooking area".
comes on.
Child Safety Device or Lock
operates. Refer to "Daily use".
comes on.
There is no cookware on the
zone. Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone. Use cookware with correct
dimensions. Refer to "Tech-
nical data".
FlexiBridge operates. One
or more sections of the func-
tion mode which operates
are not covered by the cook-
ware. Place the cookware on the
correct number of sections
of the function mode which
operates or change the func-
tion mode. Refer to "Flexi-
ble induction cooking area".
PowerSlide operates. Two
pots are placed on the flexi-
ble induction cooking area. Use only one pot. Refer to
"Flexible induction cooking
area".
and a number come on.
There is an error in the hob. Deactivate the hob and acti-
vate it again after 30 sec-
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise. The electrical connection is
incorrect. Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
www.aeg.com 20