Problem
Possible cause
Remedy
and a number come on.
There is an error in the hob. Deactivate the hob and acti‐
vate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin‐
ues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a
qualified electrician to check
the installation.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model IAE84411FB
PNC 949 597 476 00
Typ 62 D4A 01 AA
220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW
Made in Germany
Ser.Nr. .................
7.35 kW
AEG
9.2 Cooking zones specification
Cooking zone
Nominal power
(maximum
heat setting)
[W]
PowerBoost
[W]
PowerBoost
maximum dura‐
tion [min]
Cookware di‐
ameter [mm]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Right front
2300
3200
10
125 - 210
Right rear
2300
3200
10
125 - 210
www.aeg.com
20