4.2
Control knob
Symbol
Description
no gas supply / off posi-
tion
Symbol
Description
ignition position / maxi-
mum gas supply
minimum gas supply
5.
DAILY USE
WARNING!
Refer to Safety chapters.
5.1
Burner overview
A
B
D
C
C
D
A
B
A.
Burner cap
B.
Burner crown
C.
Ignition candle
D.
Thermocouple
5.2
Ignition of the burner
Always light the burner
before you put on the
cookware.
WARNING!
Be very careful when you use
open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
1.
Push the control knob down and turn
it counterclockwise to the maximum
gas supply position ( ).
2.
Keep the control knob pushed for
equal or less than 10 seconds. This
lets the thermocouple warm up. If
not, the gas supply is interrupted.
3.
Adjust the flame after it is regular.
If after some tries the burner
does not light, check if the
crown and its cap are in
correct positions.
WARNING!
Do not keep the control
knob pushed for more than
15 seconds. If the burner
does not light after 15
seconds, release the control
knob, turn it into off position
and try to light the burner
again after minimum 1
minute.
ENGLISH
13
