AEG FSK73400P User Manual Download Page 22

Problem

Possible cause and solution

Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.

• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to 

"The water softener"

.

• Even using multi-functional tabs use salt and set re-

generation of the water softener. Refer to 

"The water

softener"

.

• If lime scale deposits still remain, clean the appliance

with appliance cleaners which are particularly suitable
for this purpose.

• Try different detergent.
• Contact the detergent manufacturer.

Dull, discoloured or chipped
tableware.

• Make sure that only dishwasher-safe items are washed

in the appliance.

• Load and unload the basket carefully. Refer to basket

loading leaflet.

• Place delicate items in the upper basket.

Refer to 

"Before first use"

"Daily use"

 or 

"Hints and

tips"

 for other possible

causes.

13. 

TECHNICAL INFORMATION

Dimensions

Width / height / depth (mm) 446 / 818 - 898 / 550

Electrical connection 

1)

Voltage (V)

200 - 240

Frequency (Hz)

50 / 60

Water supply pressure

Min. / max. bar (MPa)

0.5 (0.05) / 8 (0.8)

Water supply

Cold water or hot water 

2)

max 60 °C

Capacity

Place settings

9

Power consumption

Left-on mode (W)

5.0

Power consumption

Off-mode (W)

0.50

1) 

Refer to the rating plate for other values.

2) 

If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the

hot water supply to decrease energy consumption.

14. 

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol 

.

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of
appliances marked with the symbol 

with the household waste. Return the

www.aeg.com

22

Summary of Contents for FSK73400P

























Reviews: