For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6.
BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Settings
Values
Description
Water hardness
From level 1 to level
10 (default: 5)
Adjust the level of the water softener accord-
ing to the water hardness in your area.
1)
Rinse aid level
From level 0 to level
6 (default: 4)
Adjust the level of the rinse aid according to
the necessary dosage.
1)
End sound
ON
OFF (default)
Activate or deactivate the acoustic signal for
the end of a programme.
1)
Auto door open
ON (default)
OFF
Activate or deactivate AirDry.
1)
Key tones
ON (default)
OFF
Activate or deactivate the sound of the but-
tons when pressed.
Latest prog. selec-
tion
ON
OFF (default)
Enable or disable the automatic selection of
the most recently used programme and op-
tions.
1)
Display on floor
ON (default)
OFF
Activate or deactivate TimeBeam.
1)
Brightness
From level 0 to level
9
Adjust the brightness of the display.
Language
List of languages
(default: English)
Set the preferred language.
Reset settings
YES
NO
Reset the appliance to the factory settings.
PNC number
Number
Check the PNC number of your appliance.
1)
1)
For more details, refer to the information provided in this chapter.
6.1
The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
www.aeg.com
10