AEG FSE75748P User Manual Download Page 27

Problem

Possible cause and solution

Odours inside the appliance.

• Refer to "Internal cleaning".

• Start the Machine Care programme with a descaler or

a cleaning product designed for dishwashers.

Limescale deposits on the ta‐

bleware, on the tub and on the

inside of the door.

• The level of salt is low, check the refill indicator.

• The cap of the salt container is loose.

• Your tap water is hard. Refer to "The water soften‐

er".

• Use salt and set regeneration of the water softener

even when multi-functional tablets are used. Refer to 

"The water softener".

• Start the Machine Care programme with a descaler

designed for dishwashers.

• If limescale deposits persist, clean the appliance with

the suitable detergents.

• Try a different detergent.

• Contact the detergent manufacturer.

Dull, discoloured or chipped

tableware.

• Make sure that only dishwasher-safe items are wash‐

ed in the appliance.

• Load and unload the basket carefully. Refer to the

basket loading leaflet.

• Place delicate items in the upper basket.

• Activate the GlassCare option to ensure special care

for glassware and delicate items.

Refer to "Before first use"

"Daily use", or "Hints and

tips" for other possible

causes.

12. TECHNICAL INFORMATION

Dimensions

Width / height / depth (mm)

596 / 818 - 898 / 560

Electrical connection 

1)

Voltage (V)

200 - 240

Frequency (Hz)

50 - 60

Water supply pressure

bar (minimum and maximum)

0.5 - 10

MPa (minimum and maximum)

0.05 - 1.0

Water supply

Cold water or hot water 

2)

max 60 °C

Capacity

Place settings

14

1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply
to decrease energy consumption.

ENGLISH

27

Summary of Contents for FSE75748P

































Reviews: