5.1
Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
9.9
0.821
237
7 - 12
0.7 - 1.5
45 - 160
13 - 15
1.4 - 1.6
140 - 160
9
0.8
30
13 - 14
0.9 - 1.1
70 - 85
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2
Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6.
SETTINGS
6.1
Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
Delay
and
Option
until the appliance is in
programme selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously
Delay
and
Option
until
the indicators
,
and
flash and the display is blank.
6.2
The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
www.aeg.com
32
