Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1
XtraDry
（增
强
烘干）
Activate this option to boost the drying
performance. With XtraDry
（增
强
烘干）
on, the duration of some programmes,
water consumption and the last rinse
temperature can be affected.
XtraDry
（增
强
烘干）
is a permanent
option for all programmes other than
and need not to be selected at
every cycle.
In the other programmes the setting of
XtraDry
（增
强
烘干）
is permanent and it
is automatically used in next cycles. This
configuration can be changed at any
time.
Every time
is
activated, XtraDry
（增
强
烘
干）
is off and needs to be
chosen manually.
Activating XtraDry
（增
强
烘干）
deactivates TimeSaver
（
时间
管理）
and
vice versa.
How to activate XtraDry
（增
强
烘干）
Press
Option
（
选项
）
until the indicator
is on.
The display shows the updated
programme duration.
7.2
TimeSaver
（
时间
管理）
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate TimeSaver
（
时
间
管理）
Press
Option
（
选项
）
until the indicator
is on.
The display shows the updated
programme duration.
8.
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2.
Fill the salt container.
3.
Fill the rinse aid dispenser.
4.
Open the water tap.
5.
Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1
The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1.
Turn the cap of the salt container
counterclockwise and remove it.
2.
Put 1 litre of water in the salt
container (only for the first time).
3.
Fill the salt container with 1 kg of salt
(until it is full).
www.aeg.com
12