AEG FAVORIT 66603VI0P User Manual Download Page 14

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. When

you close the door, the appliance

continues from the point of interruption.

If the door is opened for more

than 30 seconds during the

drying phase, the running

programme will end.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold 

RESET

 until the appliance

is in programme selection mode.

Cancelling the programme

Press and hold 

RESET

 until the appliance

is in programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of programme

When the programme is completed and

you open the door, the appliance is

automatically deactivated.
Close the water tap.

10. 

HINTS AND TIPS

10.1 

General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the

environment.
• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, use the prewash

programme (if available) or select a

programme with a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be

completely reached and washed by

the water released from the spray arm

nozzles. Make sure that items do not

touch or cover each other.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''3in1'',

''4in1'', ''All in 1''). Follow the

instructions written on the packaging.

• Select the programme according to

the type of load and degree of soil.

With the ECO programme you have

the most efficient use of water and

energy consumption for crockery and

cutlery with normal soil.

10.2 

Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• Multi-tablets are usually suitable in

areas with a water hardness up to 21

°dH. In areas exceeding this limit,

rinse aid and salt must be used in

addition to the multi-tablets.

However, in areas with hard and very

hard water we recommend to use

solo-detergent (powder, gel, tablets

without additional functions), rinse aid

and salt separately for optimal

cleaning and drying results.

• If you use multi-tablets you can select

the Multitab option (if available). This

option increases the cleaning and

drying results with the use of multi-

tablets.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

www.aeg.com

14

Summary of Contents for FAVORIT 66603VI0P





















Reviews: