background image

delay start. You can delay the start of

the programme from 1 to 24 hours.

4.

Press the 

OK

 key to confirm and to

start the countdown. When the

countdown is completed, the

programme starts.

Starting the MyFavourite

programme

1.

Press the on/off button to activate

the appliance.

2.

Close the appliance door.

3.

Press the MyFavourite key, the

programme starts.

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. It may

affect the energy consumption and the

programme duration. When you close

the door, the appliance continues from

the point of interruption.

If the door is opened for

more that 30 seconds during

the drying phase, the

running programme will end.

Cancelling the delay start while

the countdown operates

When you cancel the delay start the

programme and the options are set to

their default values.

1.

Open the appliance door.

2.

Press and hold the 

Program

 key for

about 3 seconds until the display

shows Stop washing?.

• Select Resume to continue with

the countdown. Press the 

OK

 key

to confirm.

• Select Stop to cancel the delay

start. Press the 

OK

 key to confirm.

Cancelling a running

programme

1.

Open the appliance door.

2.

Press and hold the 

Program

 key for

about 3 seconds until the display

shows Stop washing?.

• Select Resume to continue with

the running programme. Press the 

OK

 key to confirm.

• Select Stop to cancel the running

programme. Press the 

OK

 key to

confirm.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of programme

When the programme is completed the

display shows 0:00 and End of program.

1.

Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance. If you open the door

before the activation of Auto Off ,

the appliance is automatically

deactivated.

2.

Close the water tap.

10. 

HINTS AND TIPS

10.1 

General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the

environment.
• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, use the prewash

programme (if available) or select a

programme with a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be

completely reached and washed by

the water released from the spray arm

nozzles. Make sure that items do not

touch or cover each other.

• You can use dishwasher detergent

and rinse aid separately or you can

use the multi-tablets. Follow the

instructions written on the packaging.

• Select the programme according to

the type of load and degree of soil.

With the ECO programme you have

the most efficient use of water and

ENGLISH

15

Summary of Contents for F99705IM0P





























Reviews: