and
start to flash
and the display is blank.
2.
Press
Option
.
• The indicators
and
go off.
• The indicator
continues to flash.
• The display shows the current
setting.
–
= rinse aid dispenser
activated.
–
= rinse aid dispenser
deactivated.
3.
Press
Option
to change the setting.
4.
Press the on/off button to confirm
the setting.
6.4
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1.
To enter the user mode press and
hold simultaneously
Delay
and
Start
until the indicators
,
and
start to flash
and the display is blank.
2.
Press
Delay
• The indicators
and
go off.
• The indicator
continues to
flash.
• The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
3.
Press
Delay
to change the setting.
4.
Press the on/off button to confirm
the setting.
7.
OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1
Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press
Option
until the indicator comes
on.
7.2
ÖKO PLUS
This option decreases the temperature
of the last rinsing phase and
ENGLISH
11
Summary of Contents for F56302M0
Page 67: ...РУССКИЙ 67 ...