English
33
3. Press the arrow buttons
/ / /
to select the country of your location.
4. Press
OK
to start Channel search. This process will take a few minutes. Progress is displayed on screen.
4.6 Select Source
1. In on mode press the
SOURCE
button. The source menu (connected devices) is
displayed.
2. Press the arrow buttons
/ on the remote control or
CH
+/-
on the device to select
the desired source.
3. Press
OK
or
VOL
+/-
on the device to confirm.
NOTE:
Press the
EXIT
button to exit the menu without changes.
5. Connect External Devices
Your TV set features a variety of connectors for different devices (e.g. DVD recorder, PC, camera and set top box).
IMPORTANT!
Ensure that your TV set and all devices to be connected are turned off before connection. Observe the
user manuals of devices to be connected.
SCART Connector
Good quality analogue image and sound signals are transmitted via the SCART connector on the left hand side of the
device. Connect here devices such as VCR, satellite receiver, game console or Pay-TV decoder.
• Connect the Scart adapter cable to the
SCART
connector on the TV set.
• Connect the device via the full-featured
SCART
cable with the Scart adapter cable jack.
• In the source menu
(press
SOURC
E button)
select
SCART
.
VIDEO Connectors
You can connect e.g. a video camera via the RCA jacks
L
and
R
and the
AV
jack on the back of the unit.
• Connect the device via RCA cable to
AV
,
L
and
R
.
IMPORTANT!
Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and
audio R = red).
• Select signal input
AV
in the source menu
(press
SOURCE
button).
PC Connector
• Use a VGA cable to connect the monitor connector of the PC with the
VGA
connector on the TV set.
• Use an audio cable to connect the audio connector of the PC with
PC AUDIO
on the TV set.
• In the source menu
(press
SOURCE
button)
select
PC
.
Component Connector
The component connector
Y Pb Pr
transmits analogue image signals of external devices, e.g. AV receiver or DVD record-
er in very good quality.
• Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs
Y Pb Pr
on the TV set.
• Use an audio cable to connect the audio output of the external device with the audio connectors
AUDIO L
and
R
on
the TV set.
• In the source menu
(press
SOURCE
button)
select
YPbPr
.
HDMI- Input
Digital video and audio signals from an external device are transmitted in high quality via the HDMI ports.
• Use an HDMI cable (not supplied) to connect the
HDMI
output of the external device with the HDMI input on the TV
set.
• Select signal input
HDMI1
resp.
HDMI2
in the source menu
(press
SOURCE
button).
Summary of Contents for CTV 3204 LED
Page 71: ......
