62
ENGLISH
7.6 Display Information
You can display additional information for the current channel.
1. Press
TV MENU
to enter the OSD main menu.
2. In the
CHANNEL
menu press to select
Signal Information
and press
OK
.
8. Programme Info (EPG – only for DVB-T)
The Electronic Program Guide (EPG) is broadcast by many, but not all, programme providers. The contents can also
greatly vary.
The EPG shows a daily overview of current or upcoming programmes with their respective broadcasting times.
1. Press the
EPG
button to open the programme info.
2. Use the following buttons for changes:
/ :
Toggle between channel/time overview (1) and change the
date (2) or channel.
/ :
Select channel.
OK:
Access selected channel.
INDEX:
Go to channel/time overview (1). Press / to toggle
between channel and time overviews.
CHANNEL:
The date (2) changes to CHANNEL. Press /
to
select the channel with the programmes to be viewed.
Time:
CHANNEL changes to date (2). The window again dis
-
plays the individual channels (3) and their current program
-
mes (4).
INFO:
Display detail information about selected programmes.
yellow button:
Display schedule.
red button:
Open recording window
( see “9.3 Programmed Recording
with EPG” on page 64).
blue button:
Open remind window
( see “Save Programmes”).
EXIT:
Exit EPG.
Save Programmes
EPG allows you to save the programme start. The programmes are displayed in the schedule list. In on mode 10 seconds
before programme start a promt is shown asking you to switch channels. If no button is pressed or if you press
to
confirm the channel is switched. Press to stay with the current channel.
1. Press the
EPG
button to open the EPG window.
2. Press
INDEX
and then press / to select CHANNEL (1).
3. In CHANNEL (2) press / to select the channel.
4. Press / to select the desired programme.
5. Press the
blue
button.
6. In the next window confirm the values with
OK
or change the values. The recorder schedule list with all saved
programmes is displayed.
7. Press
EXIT
to close the window.
Overview
