7.
CLOCK FUNCTIONS
7.1
Clock functions table
Clock function
Application
Time of Day
To show or change the time of day. You can change the
time of day only when the oven is on.
Duration
To set how long the oven works.
End Time
To set when the oven turns off.
Time Delay
To combine Duration and End Time function.
Set + Go
To turn on the oven with necessary settings with only
one press of the sensor field any time later.
Minute Minder
To set a countdown time. This function has no effect on
the operation of the oven. You can set the Minute Mind-
er at any time and also when the oven is off.
00:00
Count Up Timer
To set the count up, which shows how long the oven
works. It is on immediately when the oven starts to heat.
The Count Up Timer is not turned on if Duration and
End Time are set. This function has no effect on the op-
eration of the oven.
7.2
Setting and changing the
time
After the first connection to the mains,
wait until the display shows and
12:00
.
"
12
" flashes.
1.
Press
or
to set the hours.
2.
Press
.
3.
Press
or
to set the minutes.
4.
Press
.
The display shows the new time.
To change the time of day press
again and again until starts to flash.
7.3
Setting the Duration
1.
Set a heating function and
temperature.
2.
Press again and again until
starts to flash.
3.
Press
or
to set the minutes for
Duration.
4.
Press
or the Duration starts
automatically after 5 seconds.
5.
Press
or
to set the hours for
Duration.
6.
Press
or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing and time setting. The oven
turns off.
7.
Press a sensor field to stop the
signal.
8.
Turn off the oven.
7.4
Setting the End Time
1.
Set a heating function and
temperature.
2.
Press again and again until
starts to flash.
3.
Press
or
to set the End Time
and press
. First you set the
minutes and then the hours.
www.aeg.com
14
