AEG BP532310MM, User Manual, Page: 13 / 40

6. Put the tip of the spit into the
turnspit hole.
7. Lay the back side of the spit on the
turnspit frame.
Refer to "Product description"
chapter.
8. Remove the turnspit handle.
9. Select a function with the turnspit
position. The turnspit rotates.
10. Set the necessary temperature. Refer
to the cooking tables or the recipe
book.
The turnspit does not stop if
you open the oven door.
If a clock function (Duration
or End) ends and you do not
deactivate the appliance,
the turnspit continues to
operate for the next 10
minutes.
7.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray / Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and
the wire shelf on the guide bars above.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim
around the shelf prevents
cookware from slipping of
the shelf.
8. ADDITIONAL FUNCTIONS
8.1 Using the Function Lock
You can activate the Function Lock
function only when the appliance
operates.
This function locks the door, prevents an
accidental change of the temperature
and time settings of a running oven
function.
1. Select an oven function and set it
according your preferences
2. Press and hold and at the
same time for 2 seconds.
An acoustic signal sounds. Loc comes on
in the display.
To deactivate the Function Lock, repeat
step 2.
ENGLISH 13