Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with . Do not set any heat setting.
Touch for 4 seconds. comes on.
Deactivate the hob with .
To deactivate the function: activate the
hob with . Do not set any heat setting.
Touch for 4 seconds. comes on.
Deactivate the hob with .
Power limitation
Originally the hob is at its highest
possible power level.
To decrease or increase the power
level:
1. Deactivate the hob.
2. Touch for 3 seconds. The display
comes on and goes off.
3. Touch for 3 seconds. P36 comes
on.
4. Touch
/
of the front cooking
zone to set the power level.
5. Wait for the display to go off.
Power levels
Refer to “Technical data” chapter.
• P36 — 3600 W
• P15 — 1500 W
• P20 — 2000 W
• P25 — 2500 W
• P30 — 3000 W
CAUTION!
Make sure that the selected
power fits to the house
installation fuses.
Power management function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3600 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3600 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones alternates between the
chosen heat setting and the reduced
heat setting. After some time the heat
setting display of the reduced zones
stays on the reduced heat setting.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
Electric:
ENGLISH
17
