Step 3
Pull the rear end of the shelf
support away from the side
wall and remove it.
2
1
Step 4
Install the shelf supports in
the opposite sequence.
The retaining pins on the tele‐
scopic runners must point to
the front.
11.4 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Before the catalytic cleaning
Turn off the oven and wait
until it is cold.
Remove all accessories and
removable shelf supports.
Clean the oven floor and the
inner door glass with warm
water, soft cloth and mild de‐
tergent.
Clean the oven with catalytic cleaning
Step 1
Step 2
Step 3
Set the function and the
oven temperature:
250 °C
After cleaning, turn the knob for
the oven functions to the off po‐
sition. When the cleaning ends
the signal sounds. Press any
button to turn off the signal.
When the oven is cold,
clean the cavity with a wet
soft cloth.
To stop the cleaning before it finishes turn the knob for the heating functions to the off po‐
sition.
11.5 Cleaning reminder
The oven reminds you when to clean the
oven with: catalytic cleaning.
CATA - flashes in the display for 10 sec
after each activation and deactivation of
the oven.
,
- press at the same time to
turn off the reminder.
11.6 How to remove and
install: Door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
www.aeg.com
38
