--------------------------------------------------------------------------------11/45--------------------------------------------------------------------------------
3.2
Instructions for the hardware settings
3.2.1
BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format:
BD
<SP>
parameter
<CR>
Output (example):
2
<CR>
Parameter:
PARAMETER
FUNCTION
0
4800 baud
1
9600 baud
2
19200 baud
3
38400 baud
4
57600 baud
5
115200 baud
3.2.2
HF – radio frequency
With the command HF you can switch the antenna field on and off.
Input format:
HF
<SP>
parameter
<CR>
Output (example):
1
<CR>
Parameter:
PARAMETER
FUNCTION
0
off
1
on
3.2.3
HID – human interface device/keyboard
The command switches the interface ether to HID or RS232 emulation.
Input format:
HID
<SP>
parameter
<CR>
Summary of Contents for ARE DT1
Page 1: ...ARE DT1 Installation Guide ...
Page 4: ... 4 45 10 REVISIONS 45 ...
