For maximum duration
values, refer to "Technical
data".
5.11 Timer
•
Count Down Timer
You can use this function to set the
length of a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To activate the function or change the
time: touch . The timer digits 00 and
the indicators and light up on the
display. turns red, and turns white.
If the timer is not set, all
indicators disappear after 3
seconds.
Touch or to set the time (00 - 99
minutes). After 3 seconds, the timer
starts to count down automatically. The
indicators , , and disappear.
stays red.
When the timer finishes counting down, a
signal sounds and 00 flashes. To stop
the signal, touch .
To deactivate the function: touch .
The indicators and light up. Use
or to set 00 on the display.
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
•
CountUp Timer
You can use this function to monitor how
long a cooking zone operates.
To activate the function: touch
twice. The indicator turns red, the
timer starts automatically.
To deactivate the function: touch .
When the indicators light up, touch .
•
Minute Minder
You can use this function as a Minute
Minder when the hob is activated but the
cooking zones do not operate. To see
the Timer symbols, place a pot on a
cooking zone.
To activate the function: touch until
the indicator turns red. Touch or
to set the time. The function starts
automatically after 4 seconds. The
indicators , , and disappear.
stays red.
When you set the function, you can
remove the pot.
When the time comes to an end, a signal
sounds and 00 flashes. Touch to stop
the signal.
To deactivate the function: touch .
The indicators and light up. Use
or to set 00 on the display.
The function has no effect
on the operation of the
cooking zones.
6. ADDITIONAL FUNCTIONS
6.1 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are
locked.
When the function is active,
and symbols can be
used. The function does not
stop the timer functions:
and .
To activate the function: touch . The
symbol turns red. The heat setting is
lowered to 1.
www.aeg.com
14
