AEG 7332543721740, User Manual, Page: 28 / 72

Problem Possible cause Solution
Products to be frozen are
placed too closely to each
other. Make sure that there is cold
air circulation in the appli-
ance.
The appliance is positioned
near the heat source. Refer to "Installation/Loca-
tion" chapter.
If your appliance is still not working properly after making the above checks, contact
the nearest Authorised Service Center.
Specify the model and serial number of your appliance when you contact Authorised
Service Center. This will accelerate the support received.
11. TECHNICAL DATA
Model
Height Width Depth Voltage Frequency
Rising
time
mm mm mm Volts Hz Hours
AHB410E1
AW 845 545 545 230-240 50 24
AHB520E1
LW 845 905 545 230-240 50 30
AHB520F1
LW 845 905 545 230-240 50 30
AHB526E1
LW 845 960 700 230-240 50 36
AHB531E1
LW 845 1120 700 230-240 50 37
AHS531EX
LW 845 1120 700 230-240 50 37
AHS531EC
LW 845 1120 700 230-240 50 37
AHB531F1
LW 845 1120 700 230-240 50 37
AHB538E1
LW 845 1300 700 230-240 50 40
AHB538F1
LW 845 1300 700 230-240 50 37
AHB414E1
AW 845 705 545 230-240 50 26
AHB414F1
AW 845 705 545 230-240 50 26
www.aeg.com 28