AEG 6000 EXTRACTIONTECH, User Manual, Page: 30 / 140

4.2 Replacing the charcoal
filter
The charcoal filter must be replaced if
the filter alarm is on.
Refer to the filter alarm in
this chapter.
The time of saturation of the charcoal
filter varies depending on the type of
cooking and the regularity of cleaning
the grease filter.
WARNING!
The charcoal filter is NON-
washable! The filter cannot
be regenerated!
To replace the charcoal filter:
1. Remove the grease filters from the
appliance.
Refer to "Cleaning the grease filter" in
this chapter.
2. Turn the filter counterclockwise (1)
and then pull (2).
1
2
To mount the filters back follow the steps
in reverse order.
4.3 Filter alarm
Refer to activating and
deactivating the filter alarm
in daily use chapter.
Refer to cleaning the grease
filter in this chapter.
Refer to cleaning the
charcoal filter or replacing
the charcoal filter (depends
on filter type).
To reset the alarm:
Touch the for 3 seconds.
4.4 Replacing the lamp
This appliance is supplied with a LED
lamp. This part can be replaced by a
technician only. In case of any
malfunction refer to "Service" in the
"Safety Instructions" chapter.
5. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ZZZDHJFRP