background image

2.5 

Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Please note that self-repair or non-

professional repair can have safety

consequences and might void the

guarantee.

• The following spare parts will be

available for 7 years after the model

has been discontinued: thermostats,

temperature sensors, printed circuit

boards, light sources, door handles,

door hinges, trays and baskets. Please

note that some of these spare parts

are only available to professional

repairers, and that not all spare parts

are relevant for all models.

• Door gaskets will be available for 10

years after the model has been

discontinued.

2.6 

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children

and pets to be closed inside of the

appliance.

• The refrigerant circuit and the

insulation materials of this appliance

are ozone-friendly.

• The insulation foam contains

flammable gas. Contact your

municipal authority for information on

how to discard the appliance

correctly.

• Do not cause damage to the part of

the cooling unit that is near the heat

exchanger.

3. 

INSTALLATION

WARNING!

Refer to Safety chapters.

WARNING!

Refer to installation

instruction document to

install your appliance.

WARNING!

Fix the appliance in

accordance with installation

instruction document to

avoid a risk of instability of

the appliance.

3.1 

Dimensions

H

1

H

2

W2

D

2

W1

D

1

W3

D

3

11

1,6

www.aeg.com

6

Summary of Contents for 5000 Series





















Reviews: